The Time Events dialog contains all event sensors that can trigger a camera action based on time.
In order to filter events, the camera provides an Event Logic: This dialog allows linking events to create logic events only if the linked events occur in a certain sequence and within the specified time frame. Another possibility to filter events is the Event Counter: It creates an event only if a certain number of events occurs within the specified time frame.
Event Sensor Type |
Description |
---|---|
Periodic Event |
The periodic event is a simple version of a time-controlled event. Use this event if you would like to create events in intervals < 1 minute.
RemarkThe periodic event works with absolute time comparison, i.e., a periodic event with a 60 second interval will always trigger at the full minute. |
Time Task |
Time-controlled events are triggered at fixed points in time. For a detailed description of the syntax, please refer to the Time Control online help topic. |
Random Event |
The camera can trigger an event at a random point in time. Enter the number of random events per hour. This value represents the average number of events to be triggered per hour for a longer period. Valid values: NoteThis feature is not available for Web and Basic models. |
Cliquez sur le bouton Définirpour activer les paramètres et les sauvegarder jusqu'au prochain démarrage de la caméra.
Cliquez sur le bouton Config. usine pour réinitialiser tous les paramètres de cette boîte de dialogue selon la configuration initiale (ce bouton n'est peut-être pas disponible pour toutes les boîtes de dialogue).
Cliquez sur le bouton Restaurer pour annuler les dernières modifications qui n'ont pas été enregistrées définitivement dans la caméra.
Cliquer sur le bouton Fermer pour fermer la boîte de dialogue. Lors de la fermeture de la boîte de dialogue, le système vérifie si les paramètres ont été modifiés. Si tel est le cas, le programme vous demande si vous souhaitez enregistrer ou non de façon permanente la configuration globale.