Open the Color Settings dialog to adjust the color settings of the image sensors in order to optimize the camera for the lighting that is available.
Some of these settings can be changed using the pull-down menus above the image on the Live screen.
Click on the More button at the bottom of the dialog to display all options.
Linked Image Control |
If Linked Image Control is activated, the camera uses the same exposure values and internal image correction settings for both sensors. This ensures that the images from both sensors look as similar as possible. NoteThis parameter is only available for models with identical image sensors. |
||||||||||||||||||||||||||
White Balance |
Under certain lighting conditions, the color truthfulness of white areas may vary. White balance is used to correct this kind of color variation. Select one of the following profiles for white balance:
NoteThe two profiles Automatic WB (Extended) and Automatic WB (Warm Artificial Light) are not available on all camera models. |
||||||||||||||||||||||||||
Color Saturation |
Color saturation controls the color intensity. The higher the saturation, the more intense are the colors. The value -10 produces a gray-scale image. |
||||||||||||||||||||||||||
Automatic Saturation Control |
This parameter allows reducing the perceived image noise by automatically adjusting the color saturation of images in dark scenes to the image brightness. The factory default setting is activated. NoteThis feature is not available on cameras with 1MP and 3MP image sensors. |
||||||||||||||||||||||||||
Blue Balance |
Controls the blue channel of the image. |
||||||||||||||||||||||||||
Red Balance |
Controls the red channel of the image. |
Cliquez sur le bouton Définirpour activer les paramètres et les sauvegarder jusqu'au prochain démarrage de la caméra.
Cliquez sur le bouton Config. usine pour réinitialiser tous les paramètres de cette boîte de dialogue selon la configuration initiale (ce bouton n'est peut-être pas disponible pour toutes les boîtes de dialogue).
Cliquez sur le bouton Restaurer pour annuler les dernières modifications qui n'ont pas été enregistrées définitivement dans la caméra.
Cliquer sur le bouton Fermer pour fermer la boîte de dialogue. Lors de la fermeture de la boîte de dialogue, le système vérifie si les paramètres ont été modifiés. Si tel est le cas, le programme vous demande si vous souhaitez enregistrer ou non de façon permanente la configuration globale.